my world

Everyone needs a pair and you can make 6 if you buy a case!

Here’s what you need:
-2 bottle caps (I used Molson Canadian)
-2 ear wires
-2 headpins
-2 small beads
-a spot of crazy glue

Tools:
-drill with tiny bit
-round nose pliers
-another pair of pliers or jump ring tool
-flush cutter

Mark the top of each bottle cap with a sharpie. This is where you will drill a small hole for the headpin.

Place the headpin into your drilled hole so the head is resting inside the bottle cap. Add one small bead and using your round nose pliers, turn into a round loop. Trim the excess wire.

Open the loop of your ear wire and add the charm.

To keep the bottle cap from spinning on the headpin (the back side is not so pretty!), dab a spot of crazy glue inside on the head of the headpin. Let the glue dry overnight while you plan your outfit for tomorrow’s debut!

This entry was posted on Sunday, August 5th, 2007 at 6:08 pm and is filed under Jewelry & Crafts. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.